Gear: F-N-R Thrust: 600-1500kg, with a speed of around 11-13 kilometers per hour (depending on the environment, water area, and ship load, the speed may vary)

Our Machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.

Specification:
Suitable for: Freshwater and saltwater
One year warranty covers the motor, to provide parts free
Type: 4 stroke 7 horsepower
Capacity: 196CC
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
Maximum speed: 4500-5500
Maximum power: 7 HP
Shift position: clutch control
Package volume: 120x60x42.5 cm
Ignition system: TCI
Cooling system: air cooling
Starting method: hand start
Refueling: No. 93 gasoline
Propeller size: 3-7 1/2''x5''
Gear position:F-N-R
Control system: Tiller control
N.W./G.W.:26.7/31.7kgs
Recommended Lubricant：4 stroke lubricant oil
Trim and tilt system:Mannual tilt
Standard fuel tank capacity:1.4L/within
long shaft: 50cm

Must read before using:
Four stroke 7 hp:
Firstly, Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly, Fill engine oil don't exceed the head of the pattern.
Fourthly, Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.
Then, turn the accelerator gets up to 50% and rapidly pull the starter line.
After the motor start, please turn the gear to minimum before put another gear.
Otherwise, the gearwheel will be broken if you put high gear.